Ariadna Infinity Starter Pack

 Line Kazak (female)

 Veteran Kazak

 3rd Highlander Grey Rifles

 4 eme de Chasseurs

 Line Kazak(male 1)

 Line Kazak(Male 2)

 ans a U.S. Quarter for scale....

 Group Shot(two different angles)

These guys are true 28mm which means they are smaller than what we are used to. And what a Challenge they were!  I look forward to the next group of models from this line....

Ravagor and Carnivean

 greenstuffung the head gap

 pinning the arm

 JB Weld in the body cavity

 I ha to put two different pins in the body, one going all the way through to the legs, and the other through to the head,

Manta Coockpit

 Drilling holes in the "Glass" to cut it out, here you can also see the wound the Overlord gave me to show her displeasure with me over the mass amount of resin toy taking up here favorite hiding place.

 The inside the cockpit.

 Windscreen removed. and will be replaced with a transparent one, so that the LED can shine through showing the Blacksun Filter

 Inside

and the side before I smoothed out the drill holes.  Fortunately the cast was thin enough that I could cut it with an exacto.

Swarmlord WIP

This is my Swarmlord, I felt it needed something much more dynamic than just standing on the ground, and since I already had a really good looking Flyrant,  I just figured I would use what they gave me,  the Marine will be one of the hated Black Templars, as they decorate the bases  of  all my big bugs.

Nomad Starter Pack

Here is our first Infinity models to be finished, a Nomad Starter Pack.  Our good friend Luci Leven is the proud owner of these beauties!!  The Quarter is to show their true scale...

More Manta

 Here I have broken apart the Cockpit section from the Weapons Operators section to repair the dents that were caused by FW removing the model too quickly from the mold.  This also allows me to re-align the fit, as there was a ledge along the seem.

 This shot showcases how very unclean the break from the mold is.

 Here I've rejoined the two sections with JB weld epoxy(that stuff is awesome!!).

 Here I've allowed it to dry, and sanded the excess off.

 After putting JB weld kwik in the holes I've sanded the excess away.  This allows additional holding power and eliminates part of the gap in the seam.

and a close-up of the repaired dent, I will have to re-scribe some of the panel lines, but I figure I,ll have to do that anyway as some of them are very shallow.

More on the Manta

 The Overlord is very unamused!!!!

 A bent Drone Carriage

 Boiling water, and now it's straight...

And I got the Drones loose from being glued in place without breaking them

Building Number 50

The Overlord is not amused by the big resin thingy in her favorite hiding place!!!!  Kitteh will not tolerate this!!!

Tau Manta

Okay I am calling this the "Tau Manta Project"  Or "Building Number 50".  I don't normally post WIP pics,but was asked by the customer to post as I did.  Unfortunately,  this beauty is number 8 in my customer queue.  That being said it will get love and attention at least one hour per day until my other projects are finished and delivered.